Timbabuild ERC10 is a fast cure, low build, solvent free epoxy wood filler, ideal for minor repairs (up to 10mm deep) and splicing of damaged or rotten wooden surfaces. ERC10 has excellent adhesive properties whilst being easy to sand to give great results, fast. Sand one hour after application at 20-35 degrees C. The epoxy is paintable to give an invisible repair in one day.
The dual cartridges extrude together at a 1:1 ratio to be mixed and used immediately.
VOC Classification A (ultra low VOC)
Features:
- Completely solvent free, low odour formula.
- Perfect for use inside and out
- cured, ready for paint in one hour at 20-35 degrees
- non shrinking and is effective as an adhesive
- Incredibly strong and doesn’t crack
- Commonly used for shallow repairs and as an adhesive for spicing once EWS hardener Primer applied and set.
- Easy to use and clean up with extrusion tool and pvc mixing board.
- Long shelf life at 24 months from Manufacture date.
|
Base Material Curing Temp (DegC) |
Gel Time (Mins) Approx. | Curing Time (Mins) Approx. |
| 5 | 15 | 70 |
| 15 | 7 | 55 |
| 25 | 5.5 | 35 |
| 35 | 4 | 30 |
| 45 | 3.5 | 30 |
Instructions
- Route out rotten timber with a router or chisel
- Apply EWS hardener (wood hardener primer)
- Extrude onto board - best to leave first 5cm to waste to ensure best results if second application using previously used tubes
- Apply, shape and smooth with a putty knife
- Sand to finish with P120. The ultimate combination is the Mirka DEOS Sander and Abranet 81 x 133mm. Hand sanding is also affective but not as fast.
- Prime, and paint
MPN: 65864
